Hylomar Universal Blue – Non-setting Gasket + Jointing Compound
Roll over image to zoom in
₹1,200.00₹1,500.00 "Price Excl. Taxes" (-20%)
Hylomar Universal Blue is a polyester urethane-based sealant that remains non-setting and non-hardening at high temperatures. It is resistant to a wide range of fluids, including industrial fuels, oils, water, and refrigerants. This compound can effectively seal joint faces and threaded parts.
Typical Applications
- Inlet manifolds
- Timing case covers
- Gearbox and transmission components
- Thread sealing
- Water and oil pumps
- Instrument inspection covers
- Cylinder heads
- Flat rigid sumps
- Most machined surfaces
- Gas turbines
- Water-cooled generators
- Turbo vacuum systems
Typical Physical Properties
- Temperature Range: -50°C to 250°C (-58°F to 482°F)
Grade-Specific Properties:
| Grade | Film Thickness | Surface Finish (Max) | Area Covered by 100g | Product Coverage After Drying |
|---|---|---|---|---|
| Light Grade | 0.015 mm | 2.0 μm Ra | 1.875 m² | 2 mg/cm² |
| Medium Grade | 0.03 mm | 3.0 μm Ra | 1.275 m² | 4 mg/cm² |
| Heavy Grade | 0.09 mm | 3.5 μm Ra | 0.56 m² | 12 mg/cm² |
Instructions for Use
- Apply to clean, dry surfaces.
- Use a thin film or bead on one or both surfaces.
- Allow sufficient time for solvent evaporation.
- The compound provides unlimited assembly time for precise alignment.
- Fasteners may need re-tightening to the correct torque.
Handling and Safety Properties
- Flammability: Non-flammable.
- Hazard Information: Contains Dichloromethane; consult the Safety Data Sheet for details on hazards and handling.
Storage Precautions
- Store in a cool, dry place between 5°C and 25°C (41°F to 77°F) with adequate ventilation.
- In warmer climates, purchase cartridges rather than tubes to prevent degradation.
Shelf Life
- 2 years when stored in original, unopened containers under recommended conditions.
Packaging
Available in:
- 40g (1.41 oz) tubes
- 100g (3.52 oz) tubes
- 350g (12.35 oz) cartridges
- 1 liter (31.81 fl oz) lever lid tins
- 25kg (55.12 lbs) kegs
- Aerosols
Note: Minor indentations on tubes after filling may cause slight pressure. Open carefully to avoid spillage.
Reviews
There are no reviews yet.